logo
永兴

News Center

Check category
/
/
/
For the photovoltaic industry to a crisis

For the photovoltaic industry to a crisis

(Summary description)The bridge frame is a general term for a system of continuous rigid structures for supporting cables by straight lines of trays, ladder frames, bends, attachments, and supports and hangers. It is a mounting channel for horizontal and vertical wiring systems. The cable tray is a cable laying device that standardizes, serializes, and generalizes the laying of wires, cables, and cables. Here we need to mention the concept of a pallet. Many people mix the bridge with the pallet and think that the

For the photovoltaic industry to a crisis

(Summary description)The bridge frame is a general term for a system of continuous rigid structures for supporting cables by straight lines of trays, ladder frames, bends, attachments, and supports and hangers. It is a mounting channel for horizontal and vertical wiring systems. The cable tray is a cable laying device that standardizes, serializes, and generalizes the laying of wires, cables, and cables. Here we need to mention the concept of a pallet. Many people mix the bridge with the pallet and think that the

Information
The bridge frame is a general term for a system of continuous rigid structures for supporting cables by straight lines of trays, ladder frames, bends, attachments, and supports and hangers. It is a mounting channel for horizontal and vertical wiring systems. The cable tray is a cable laying device that standardizes, serializes, and generalizes the laying of wires, cables, and cables. Here we need to mention the concept of a pallet. Many people mix the bridge with the pallet and think that the functions are basically the same, but it is not. There are great differences between the bridge and the trunking. The main ones are: the bridge is mainly used for laying power cables and control cables, the trunking is used for laying wires and communication cables; the bridge is relatively large (200×100 to 600×200), and the trunking Relatively small; the bridge has a relatively large turning radius, and most of the troughs are bent at right angles; the span of the bridge is relatively large, the trough is relatively small; the fixing and installation methods are different; in some places, the bridge is not covered, and the trough is usually all The closed cable trough is used to route the cable, and the bridge is used to carry the cable. Therefore, everyone should pay attention to the selection of the bridge, so as not to choose the wrong and not achieve their intended purpose.
 
 
The traditional bridges mainly include: trough cable trays, tray cable trays, stepped cable trays, large span cable trays, combined cable trays, flame retardant fiberglass cable trays, corrosion-resistant aluminum alloy cable trays, etc. These are also the bridges that are currently used in China, mostly closed bridges. What kind of bridge is used in what kind of environment, this is a very important issue. The trough cable tray is a fully enclosed cable tray, which is most suitable for shielding interference of control cables for laying computer cables, communication cables, thermocouple cables and other highly sensitive systems, and for cable protection in heavy corrosive environments. Good results. The tray type cable tray has the advantages of light weight, large load, beautiful appearance, simple structure and convenient installation. It is suitable for both power cable installation and control cable laying. Cascade cable tray, suitable for general straight and light cable laying, especially suitable for laying high and low power cables. ... These bridges have their own advantages, but they are not as good as energy-saving and optimized cable performance.
 
 
There are several types of bridge installation: installation along the roof, horizontal and vertical installation along the wall, installation along the shaft, installation along the ground, installation along the cable trench and pipe support. The support (hanging) used for installation can be finished or homemade. The fixing method of the branch (hanging) frame mainly includes welding on the embedded iron piece, fixing bolts and the like.
 
 
    There is a bridge where there is a cable. The bridge is widely used in all walks of life, most of which are used in data centers, offices, Internet service providers, hospitals, schools/universities, airports and factories, especially in the data center and IT room market. Apply a very large piece.

Scan the QR code to read on your phone

二维码

Mobile website

Online service hotline:

0511-88203333

 

Fax:0511-88362299
E-mail:
zyvec@126.com
Address:(Within  Yongxing Group )32 Line,Sanmao  Street ,

 Yangzhong City, ZhenjiangCity Jiangsu Province, China  

 

 

 

Cooperation Case

 

Cooperative enterprise

User performance

 

 

 

 

News Center

 

Company news

Industry news

 

 

 

 

Copyright © 2019   Jiangsu Yongxing Power Equipment Technology Co., Ltd.  All Rights Reserved.      苏ICP备15004723号-1    Powered by:www.300.cn